MEDIX TYPE II AMBULANCES
PROVEN IN SERVICE.
TRUSTED BY CREWS NATIONWIDE.
Backed by 25 years of ambulance manufacturing experience, Medix Type II ambulances deliver proven performance, practical design, and the choices your crew needs.
FIND THE RIGHT TYPE II FOR YOUR FLEET
Experience you can trust. People you can count on.
Connect with an authorized Medix dealer through the form below for expert guidance on configurations, pricing and delivery.
MEDIX: A TRUSTED NAME IN TYPE II AMBULANCES
For 25 years, Medix Specialty Vehicles has been building ambulances for the people who know EMS best.
Our approach is straightforward: practical designs, practical features, dependable components, and lasting value for the agencies that rely on them.
For 25 years, Medix Specialty Vehicles has been building ambulances for the people who know EMS best. Our approach is straightforward: practical designs, practical features, dependable components, and lasting value for the agencies that rely on them.
PROVEN FOR EMS
A proven Type II,
built with crews in mind.
Familiar layouts and practical features support the demands of everyday EMS.
BUILT FOR YOUR MISSION
The right choices for the way
your crew works.
Choose the roof height, drivetrain and layout that fit your mission.
VALUE FOR YOUR FLEET
The features you need at
a value that makes sense.
Get the features your crew needs while keeping fleet budgets in mind.
DEALER SUPPORT
A trusted partner who knows
your operation.
Work with a Medix dealer who is there from purchase through support.MEET THE SRH-148WD TYPE II AMBULANCE
Available on the Ford Transit 250 MR and Ford Transit 350 HR
The Medix SRH-148WD is designed for the everyday demands of ALS and BLS response and transport. Built on the Ford Transit platform, it combines familiar layouts, thoughtful design and practical features in a maneuverable Type II van ambulance. Choose the configuration that makes sense for your operation without paying for features your fleet doesn’t need.
FORD TRANSIT 250 MID ROOF
68.5" headroom
148" wheelbase
RWD or AWD
3.5L EcoBoost Gas
9,070-lb. GVWR
FORD TRANSIT 350 HIGH ROOF
72" headroom
148" wheelbase
RWD or AWD
3.5L EcoBoost Gas
9,500-lb. GVWR
SEE MORE OF THE SRH-148WD
SPECIFICATIONS
Ford OEM Transit 250 mid roof
Custom fiberglass housing for emergency lighting at front of OEM body above windshield
Rear Bumper – grip punched ADP step surface on top of OEM bumper step
Combo 35K BTU heat, 32K BTU cool
630 CFM multi-speed fan
Exhaust Fan – 2-speed, 520 CFM
Ducted A/C-heat full length SS main
Thermostatic control
Digital volt/amp meter
Easy maintenance relay/breaker electrical system w/printed circuit board
Electrical Cabinet – top of main upper cabinet w/vented/hinged locking door
Front/rear switch panels w/internal LED backlighting
Wiring – GXL, point-to-point, color coded
Front Console – CNC cut, formed & welded, securely bolted in place
Rear Control Panel – w/thermostat
Shoreline – 125V, 20-amp, 60 Hz receptacle
TST commander 400 battery disconnect
Battery Charger – 45-amp
Inverter – pre-wired
125 VAC outlets – (2)
12 VDC outlets – (2)
USB Port – dual 2-amp outlet on A/A wall
Radio Power/Ground – (2) w/antenna coax
Light bar, prewire for LED bar
Exterior Body Lights – (4) M9RCZ combo emergency/scene w/chrome bezel, (4) 700 red & (1) 700 front R/R/W/R/R on form fitted fiberglass cap, (2) 700 red, (1) 700 amber & (2) 700 LED load R/L/A/L/R on form fitted rear fiberglass light housing over rear doors
Grille – (2) LINZ6 red LEDs w/chrome bezels
Intersection – (2) M2W red LED w/chrome
Siren – 200 watt w/NC Whelen WS295SA7
Speakers, Siren – (2) 100 watt thru front bumper
Head Liner – formed single piece fiberglass
Curbside Wall – formed single piece fiberglass
Cabinet to Squad Bench Aisle – 37”
Bulkhead, laminated plywood pass-thru wall
Cabinetry – CNC cut, with standard grade laminate both sides
Full length CNC cut plywood lower wall cabinets
Full length CNC cut plywood upper wall cabinets
Recessed action area w/drug box below
3 glove box at top of bulkhead wall
Stair Chair Pocket – streetside rear main wall
Easily accessible battery charger/inverter
ALS Cabinet – CNC cut .75” plywood
Squad Bench – CNC cut .75” plywood w/vertical slide in BB storage
EVS V4 belt system on SB, EVS 1760 tech seat w/EVS V4
Interior Lighting – (8) Whelen LED dome lights
5-minute check-out timer
LED bar light in action area
Grab Handles – on each rear entry door panel, 18″ formed stainless on CS entry ALS wall
Grab Rail – 72″ overhead in ceiling
Cushions – vacu-formed/seamless upholstery
Flooring – Altro Transfloor or Lonseal solid vinyl
Oxygen Outlets – (2) in action area, (1) over squad bench
Oxygen Cylinder Retention – transverse at bulkhead w/steel bracket, (3) straps, collar & O2 cylinder wrench
IV Holders – (2) CPI 2008 recessed in ceiling
Cot Mount – GSA/AMD compliant single position floor mount
Paint Stripe – optional
Lettering/Graphics Package – optional
(2) NO SMOKING, (2) FASTEN SEATBELTS
“The amount of miles we put on our ambulances has increased by 200-300%. We now purchase Medix exclusively. The Medix ambulance has held up well to the wear and tear that a busy system can put on an ambulance.”
Scott Moore, EMS Administrator
Port Chester-Rye-Rye Brook Emergency Medical Services, Port Chester, NY